top of page
Inox meccanica

P600XP / P800XP

Press Forming Filling Machine

The automatic press forming-filling machines P600XP/P800 XP are the synthesis for Inox Meccanica. A thirty year "know-how" experience with this typology of machines.  

     The P600 XP can use moulds with a calibre varying from a minimum of 70mm up to a maximum of 180mm. Furthermore it is possible to supply oval moulds for particular product, such as Bündnerfleisch for example. The substitution of the mould and accessories is very simple and quick. The maximum length of the product that is to be packaged is 500mm for the standard version, whereas model P800 has been specifically conceived for longer products. The P800 model has a carrying capacity for products up to 800mm length. The machine functioning is electro-pneumatic. 

P600/P800x

The accessories available for each model are:

  • Automatic bulkhead for the forming of the extremities of the product

  • Long or short lamellar cone, according to the model

  • Long or short stuffing tube, according to the model. All types of synthetic and natural casings can be used 

The work cycle is as follows:

  • Placing the product inside the forming mould

  • Closing the loading door with the command control

  • Forming of the product (on request with the forming of the extremities of the product)

  • Filling of the product

  • Repositioning of the press cylinder and the pushrod

  • Automatic opening of the loading door in order to place a new piece and effect a new cycle 

Inox P800 XP
P800 XP
Inox P600XP
P600 XP

E-Tek, LLC

1000 S. Northpoint Blvd.

Waukegan, IL 60085

sales@e-tek.us

www.e-tek.us

847.752.0190

Technical Data

Air Consumption: 900 NI/min at 6 bar

Installed electrical power: 0.25 Kw 230 V. 50 Hz

Production: From 3 up to 5 Pieces per minute

Dimensions:

Model P600N - 2.600 x 830 x H 1.450

Model P600RC - 2.870 x 830 x H 1.450

Model P800N - 3.085 x 830 x H 1.450

bottom of page